Mini Regulator

The pressure reducing regulator (pressure reducing valve) is a downstream pressure controller, which is installed between the high pressure power source and the system equipment, and can control the pressure reducing output of the high pressure fluid to the required low pressure and stable fluid; It can protect the system behind the pressure reducing valve from impact. It is a manual mechanical pressure controller.

1. Adjustable pressure range: 0 ～ 1.5MPa. (15kg/cm2); Working temperature range: - 20 ℃～ 100 ℃.

2. When the required working pressure is reached, the internal and external leakage rate of the valve is zero, and the control accuracy is: ± 1%.

3. Nozzle thread: M10X1,1/8-27NPT, etc.

4. The parent body is high quality stainless steel 304/316/321, etc., and the sealing elements are polytetrafluoroethylene, fluororubber, etc.

5. A filter must be installed at the front end of the valve inlet (filtering accuracy ≤ 50 μ m) To ensure the normal operation of the pressure reducing valve and extend its service life.

6. Boundary dimension: lower valve body diameter: Φ 28 mm; Diameter of upper valve body: Φ 20 mm; Full height: 49 mm.

7. Maximum flow: 568L/min (air); 20.4L/min (water)

8. Applicable media: air, water, inorganic acid, alkali, aromatic oil, halohydrocarbon and other media.

Executive standards: GB12244-89, GB12245-89

1. Maximum inlet pressure: 220PSIG;

2. Outlet pressure: 0 ～ 90PSIG (preset constant pressure: 0.2 ～ 0.3MPa);

3. Maximum flow: 5L/min;

4. Deviation of outlet pressure value: ≤ 20%;

7. Applicable medium/temperature: municipal tap water/5 ～ 45 ℃.

Hot Tags: mini regulator, China mini regulator manufacturers, suppliers, factory, beer tap regulator pressure, keg picnic pump, keg coupler check ball, s type keg connector, beer line quick connectors, keg beer line connectors